Internal part TL-F+ adapters

With Fresh TL-F replacement vent, you get fresh air with minimal risk of draught.


Internal vent part:
The internal vent part has a condensation-protecting design, filter and a precision shutter for infinitely adjustable setting of flow. The shutter control is hidden under the cover. The distribution pattern has been carefully developed to suit underfloor heating systems. The vent releases the air upwards and to the sides. Mixture with room air is very effective. Very cooled air reaches a comfortable temperature just a few decimetres from the device. The vent is intended to serve as a replacement vent for older vents/fittings. Supplement with Ø81 or Ø98 mm adapter, depending on the size of the vent being replaced. Basic flow with approximately 3 l/s at 10 Pa is standard thanks to the minimum flow stop. The vent can be closed completely by pushing the control more forcefully towards the closed position.

The vent should be positioned high up on the wall. If there is a radiator, it is best to try to position the vent above this. With this positioning, you utilise the convection flow and achieve the best comfort level. The vent works extremely well with underfloor heating and is designed for this.

To ensure good air quality and maintained flow, the filter should be cleaned/replaced 1–2 times/year. The standard filter can be washed in a mild soap solution. The pollen and environmental filters must be replaced. The filter is fitted behind the cover, which is easily removed by pulling it straight out from the vent chassis.


  • Articlenumber
  • Material
  • Width (mm)
  • Depth (mm)
  • Height (mm)
  • Productname
    Internal part TL-F+ adapters
  • Plastic material detail
    ABS, PS
  • EtimCode
  • EAN 13